
BCPX1 / BCPX2 / BCPX2 INOX
- Input power
- 250–900 W
- Max. flow
- 6,000–15,000 L/h
- Max. head
- 6–10 m
From gardens and rain barrels to water tanks and drainage.
Find a pump that fits the job you have in mind.
Contact us for certification details for your chosen model.
Understand the application, then compare pumps.
Choose a use below to explore products.

Move clean or slightly dirty water from tanks, garden pools and cellars, or transfer stored water for watering.
Check debris size first, then the required head and hose connection. Particle limits are 3 or 5 mm, depending on the model. Confirm the residual water level for any low-suction version.








Put stored rainwater to use around pots and garden beds, with a configuration suited to your barrel and hose.
Check barrel height, pipe fittings and the 1-inch connection. The catalogue particle limit is 3 mm. Choose the power rating using the outlet height and required flow.



For transferring stored water to a higher point, explore models with maximum head ratings of 20, 30 or 40 m.
Share the outlet height, pipe length and target flow for selection against the performance curve. The catalogue gives conflicting particle limits, so confirm suitability for your water first.


Drain standing water containing small solid particles, with plastic or stainless steel housing options to suit the water and installation space.
Start with particle size: listed limits are 16, 25 or 35 mm, depending on the model. Then check the required head, outlet connection and space available.









Change the base or filter setting to suit different drainage tasks around tanks, pools and the garden.
Choose a 3-in-1 or 2-in-1 family, then confirm the base or filter setting for the particles present. The listed minimum working water level is 10 cm; confirm residual water separately. The 2-in-1 particle specification also needs confirmation.





Surface-mounted garden pumps for connecting stored water sources to watering hoses and garden water points.
Check the height difference between the water source and pump, pipe length and required flow. Listed maximum suction depth is 7–8 m. Fill the pump head with water and expel air before first use, as instructed.





Pump and pressure-tank sets for garden watering and water-transfer systems installed together in one place.
Select using the required flow and system head. The catalogue lists 1.5–3.0 bar working pressure but no tank capacity. Prime before first use, and confirm the tank size and exact model with us.



















Pumps with a stabilizing base for removing standing water from the surface of a pool cover.
Choose for the cover, discharge hose and required head. The listed particle limit is 5 mm. The 1 mm figure is residual water after pumping; confirm the start level for the selected model.


Choose the swimming-pool family for pool circulation and the bathtub family for bathtub installations. Their connections and flow ratings differ.
Confirm the pool or bathtub application first, then check connections, required flow and head. Maximum liquid temperature is listed as 35°C. Confirm the exact bathtub model with us.


Maximum flow and maximum head occur at different operating points and cannot be achieved together. Share the lift height, pipe length and target flow so we can help select a pump using its performance curve.
The catalogue upper limit for litres moved per hour. Actual flow changes with lift height and resistance in the hose or pipe.
The upper head limit in metres describes the ability to lift water and overcome pipe resistance. Select using your required flow and the performance curve together.
The maximum solid-particle size listed in the catalogue. Limits vary by model and filter setting; describe the debris in your water when checking suitability.
Hoses, filters, pressure tanks and fittings should match your pump connections and application. Share your pump model so we can help confirm compatible accessories.
View all 32 accessories





BRINGDE / Research & ManufacturingNingbo Bringde Mechanical & Electric Co., Ltd. specialises in pump research, design and manufacturing. Our products have been exported to markets including the United States, the European Union, the United Kingdom and Russia, building our experience across different applications.
Innovation drives our development. We continue to develop and improve clean-water, dirty-water, garden and pool pumps, along with accessories, bringing our expertise to everyday drainage, water supply and irrigation needs.
Contact us to discuss product models and configurations.
No. 228 Huisheng Road, Economic Development Zone, Fenghua District, Ningbo, Zhejiang, China
For printable product information, please contact BRINGDE.
bringde.com
george.yang@vip.163.com